0800 832 1947

Zip Wire Attachment - Pendulum Seat 8mm Chain

  • £69.99
  • Ex Tax: £58.33

Commercial grade pendulum seat has a protective rubber hose which covers a 2m long 8mm chain. The round seat has 4mm steel insert inside, which is covered in a thick rubber to soften impact. If when in use the angle of the seat at the braking point exceeds 45 degrees you would need to add a better brake (eg 3m Spring) or lower the angle of the ride or reduce the tension. Optional Replacement..

Available Options

Tags: Ride Device, Seat, Commercial

Commercial grade pendulum seat has a protective rubber hose which covers a 2m long 8mm chain. The round seat has 4mm steel insert inside, which is covered in a thick rubber to soften impact.

If when in use the angle of the seat at the braking point exceeds 45 degrees you would need to add a better brake (eg 3m Spring) or lower the angle of the ride or reduce the tension.

Optional Replacement Trolley Bolt and Nut set
If you are replacing a seat or any other trolley accessory then you will need to replace the trolley bolt and nut set that hold the accessory onto the trolley. The Nylon Lock Nut can only be used once, otherwise it's locking ability is damaged. The optional bolt and nut set are made from Grade A2 Stainless Steel with corrosion resistance for outdoor use.

Write a review

Note: HTML is not translated!
    Bad           Good